Installing Aluminum and Vinyl Fences Together: A Step-by-Step Guide

Combining aluminum and vinyl fencing is a great way to get the best of both materials. Aluminum fencing provides durability and a sleek look, while vinyl fencing offers privacy and low maintenance. Installing them together may seem tricky, but with the right tools and techniques, you can achieve a seamless and secure connection using aluminum wall mounts. Here’s how to do it.

Tools and Materials Needed:

Aluminum fence panels
Vinyl fence panels
Aluminum wall mounts
Measuring tape
Level
Drill with appropriate bits
Screws
Post hole digger (if installing posts)
Concrete mix (for securing posts)
Saw (if cutting panels to size)

Step 1: Plan Your Fence Layout

Before installation, mark out the fence line using stakes and string. Determine where the aluminum and vinyl sections will meet. Ensure that the transition point is strong and well-supported, as this will be the key to a secure installation.

Step 2: Install the Fence Posts

Dig post holes approximately 2-3 feet deep (or per local code) using a post hole digger.

Place aluminum and vinyl posts in the designated areas.

Fill holes with concrete mix. See more information here on dry packing or wet pouring concrete.

Step 3: Attach the Aluminum Fence Panels

Align the aluminum panels with the installed posts.

Use the drill to secure the panels to the posts with screws.

Check for level and plumb alignment before fully tightening the screws.

Step 4: Attach the Vinyl Fence Panels

Slide vinyl panels into the corresponding slots in the vinyl posts.

Secure with screws or brackets if required by the manufacturer.

Ensure the panels are level, plumb and spaced correctly.

Step 5: Connecting Aluminum and Vinyl Sections Using Wall Mounts

To seamlessly transition between aluminum and vinyl fencing:

Position the aluminum wall mount where the aluminum panel meets the vinyl post.

Mark drill points on the vinyl post for the mount.

Secure the aluminum wall mount to the vinyl post using screws.

Attach the aluminum fence panel to the wall mount, ensuring a tight and stable fit.

Step 6: Final Adjustments and Inspection

Ensure all screws are tightly secured.
Check for gaps and adjust as needed for a seamless connection.
Clean the fence to remove dust or debris from installation.

Conclusion

By following these steps, you can successfully combine aluminum and vinyl fencing for a stylish and functional boundary. Aluminum wall mounts serve as the perfect solution for securely attaching both materials, ensuring durability and stability. With proper planning and installation, your fence will provide lasting beauty and protection for years to come.

For additional information including Aluminum & Vinyl Fence Installation Videos, visit our YouTube Channel.