Description
Staggered Spear Point Top - Aluminum Fence Posts
Post Only - Fence Panels, Gates & Hardware Sold Separately
Post Includes flat cap and screws for mounting fence panel. Routed Post Design. This design utilizes holes in the post to accept the rails of the fence panel for a strong, stable connection.
Posts are 2in x 2in square and are routed to match our fence panels. We do not guarantee that our posts will match another manufacturer's product.
Post Lengths. Post lengths are determined by the panel height and are routed to fit the panel.
36in (3ft) Fence Height = 70in Post Length
48in (4ft) Fence Height = 70in Post Length
54in (4.5ft) Fence Height = 84in Post Length
60in (5ft) Fence Height = 84in Post Length
72in (6ft) 4 Rail Fence Height = 94in Post Length
Need a 48in Flush Bottom or 60in Non-Flush Bottom? No Problem. All posts can be routed for Flush Bottom or Non-Flush Bottom on request. To order a configuration that is not shown, please comment in the Customer Notes field the different bottom configuration that you would like. For example: "36in Flush Bottom" or "60in Not Flush Bottom"
Post Types
Line Posts join fence panels in a straight line.
End Posts end a fence line.
Corner Posts connect fence panels together at a 90 degree angle.
Gate Posts end a fence line and allows the opening for a gate. Gate posts are thicker than the rest of the posts to provide stability for a swinging gate.
Cap Options
Flat Cap is included with the post. You can upgrade to a Ball Cap.
Available Colors
Black
Post Specifications
Material: 6063-T5 Aluminum
Coating: AAMA 2604 Approved Polyester Powder Coat
Outside Dimensions: 2in Sq.
Wall Thickness: 0.062in for Line, End & Corner Posts, 0.125in for Gate Posts
Screws: 410 Hardened Stainless Steel With Cr6 Plating
Additional Resources
| General Specification Sheet |
  |
Warranty Information
We offer a limited warranty on all of our aluminum fence products. For full warranty information visit our "Warranty" page HERE.
