Smooth Spear Point Top Aluminum Double Gates

Smooth Spear Point Top - Aluminum Double Gates
The widths listed are for the total gate width. For example when you order a 10ft wide double gate it will be made up of (2) 5ft wide leafs. Gate Only - Posts & Fence Panels Sold Separately. Add-on hardware options are availble.

Available Heights
48in (4ft), 54in (4.5ft) Flush Bottom, 60in (5ft), 72in (6ft) 4 Rail
Need a 48in Flush Bottom or 54in Non-Flush Bottom? No Problem. All heights can have the bottom rail configured to be Flush Bottom or Non-Flush Bottom on request. To order a configuration that is not shown, please comment in the Customer Notes field the different bottom configuration that you would like. For example: "36in Flush Bottom" or "54in Not Flush Bottom"

Available Widths
96in (8ft), 120in (10ft), 144in (12ft)
In order to accomodate different hardware options, we recommending installing the gate posts/columns 2-1/2in wider than the ACTUAL double gate width.

Picket Spacing
Standard spacing is 3-13/16in and double spacing is 1-5/8in. The 1-5/8in spacing is the perfect choice for small pets.

Avaiable Top Designs
Rainbow Arch Top or Bell Estate Arch Top

Available Hardware Options
Add Standard Hardware Option includes (4) 5in self-closing hinges, (1) 24in drop rod and (1) standard gate gravity latch. Add Pool Code Hardware Option includes (4) D&D Technologies TruClose self-closing hinges, (1) 24in drop rod and (1) D&D Technologies MagnaLatch top pull gate latch.

Standard                                Pool Code

Slope Option
When installing a gate on a hill, the gate needs to be fabricated with a slope that matches the slope of the hill. We would require a measurement in inches for the slope.

                                            Slope In Inches

Visit our YouTube channel to see how to measure for a slope gate.

Available Colors
Black

ICC Swimming Pool Code Approved Heights
Standard Picket Spacing: 54in Flush Bottom, 60in, 72in
Double Picket Spacing: 48in, 54in, 60in, 72in
Pool Code Gate Hardware Required. Check local codes before purchasing.

Gate Specifications
Material: 6063-T5 Aluminum
Coating: AAMA 2604 Approved Polyester Powder Coat
Pickets: 5/8in Sq. x 0.050in Wall Rails: 1in Sq. x 0.055in Wall
Uprights: 1-1/2in Sq. x 0.100in Wall
All welded construction.

Additional Resources

General Specification Sheet

Warranty Information
We offer a limited warranty on all of our aluminum fence products. For full warranty information visit our "Warranty" page HERE.