Description
Privacy - Vinyl Gates
Gate Only - Posts, Fence Panels & Hardware Sold Separately
Our gates are built using full width pickets to maintain structural integrity. The pocket rails are glued into heavy duty gate sockets. The sockets are glued and rivited into the gate uprights. An additional cross brace is glued and screwed to one side of the gate for additional support. Screws are finished with color matched caps.
Available Heights
46-3/4in, 58-3/4in, 70-3/4in
Available Widths
44-1/2in, 62-1/2in
Available Hardware Options
Add Standard Hardware Option includes (2) Self-Closing Horizontally Adjustable Hinges & (1) Standard Post Gate Latch
This combination will meet ICC Pool Code when the latch is mounted at the correct height.
Slope Option
When installing a gate on a hill, the gate needs to be fabricated with a slope that matches the slope of the hill. We would require a measurement in inches for the slope. Visit our FAQs page to see how to measure for a slope gate.
Slope In Inches
Available Colors
White, Tan
ICC Swimming Pool Code Approved Heights
58-3/4in, 70-3/4in
Check local codes before purchasing.
Gate Specifications
Material: VMA Certified PVC
Tongue & Groove Pickets: 6in x 7/8in x 0.050in Wall
Pocket Rails: 5-1/2in x 1-3/4in x 0.085in Wall
Gate Uprights: 4in Sq. x 0.135in Wall
Heavy Duty Gate Sockets, Single Sided Cross Brace
Additional Resources
| General Specification Sheet |
  |
| Dimensional Specification Sheet |
 |
Warranty Information
We offer a limited warranty on all of our vinyl fence products. For full warranty information visit our "Warranty" page HERE.
